features ? ? ? ? ? well defined spatial radiation pattern ? ? ? ? ? high luminous white emission ? ? ? ? ? viewing angle: 50 and 70. ? ? ? ? ? standoff or non-standoff leads ? ? ? ? ? superior resistance to moisture applications ? ? ? ? ? electronic signs and signals ? ? ? ? ? small area illumination ? ? ? ? ? legend backlighting ? ? ? ? ? general purpose indicators benefit ? ? ? ? ? reduced power consumption, higher reliability, and increased optical/mechanical design flexibility compared to incandescent bulbs and other alternative white light sources. agilent t-1 ? (5mm) extra bright precision optical performance white led lamps. data sheet description these high intensity white led lamps are based on ingan material technology. a blue led die is coated by phosphor to produce white. the typical resulting color is described by the coordinates x = 0.31, y = 0.31 using the 1931 cie chromaticity diagram. these t-1 ? lamps are untinted, diffused, and incorporate precise optics which produce well-defined spatial radiation patterns at specific viewing cone angle. hlmp-cw46, hlmp-cw47. hlmp-cw76, hlmp-cw77 caution: devices are class 1 esd sensitive. please observe appropriate precautions during handling and processing. refer to application note an-1142 for additional details.
2 part numbering system package dimensions package dimension b package dimension a 1.14 ?0.20 (0.045 ?0.008) 5.80 ?0.20 (0.228 ?0.008) 5.00 ?0.20 (0.197 ?0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 ?0.20 (0.343 ?0.008) 2.54 ?0.38 (0.100 ?0.015) 0.50 ?0.10 (0.020 ?0.004) sq. typ. cathode lead 2.35 (0.093) max. cathode flat notes: 1. all dimensions are in millimeters /inches. 2. epoxy meniscus may extend about 1mm (0.040") down the leads. 3. if heat-sinking application is required, the terminal for heat sink is anode. 1.14 ?0.20 (0.045 ?0.008) 5.80 ?0.20 (0.228 ?0.008) 5.00 ?0.20 (0.197 ?0.008) 31.60 (1.244) min. 0.70 (0.028) max. 1.00 (0.039) min. 8.71 ?0.20 (0.343 ?0.008) 2.54 ?0.38 (0.100 ?0.015) 0.50 ?0.10 (0.020 ?0.004) sq. typ. cathode lead cathode flat 1.50 ?0.15 (0.059 ?0.006) dimension h mechanical option 00: bulk dd: ammo pack straight leads color bin options 0: full color bin distribution b: color bin 2 & 3 only maximum intensity bin 0: no maximum intensity bin limit others: refer to device selection guide minimum intensity bin refer to device selection guide viewing angle and standoff option 46: 50? without standoff 47: 50? with standoff 76: 70? without standoff 77: 70? with standoff h l m p - -xxxxxxx cw dimension h: 50? 11.98 ?0.25mm (0.4715 ?0.01 inches) 70? 11.09 ?0.25mm (0.4365 ?0.01 inches)
3 device selection guide notes: 1. tolerance for luminous intensity measurement is +/- 15% 2. the luminous intensity is measured on the mechanical axis of the lamp package. 3. the optical axis is closely aligned with the package mechanical axis. 4. 2 1/2 is the off-axis angle where the luminous intensity is ?the on axis intensity 5. part numbers in bold are recommended for new designs. part number typ i cal vie win g an gl e, 2 ? (degree) intensity (mcd) at 20 ma standoff package dimension min. max. hlmp-cw46-ps0xx 50 880 2500 no a hlmp-cw46-qr0xx 50 1150 1900 no a hlmp-cw46-qrbxx 50 1150 1900 no a hlmp-cw46-ru0xx 50 1500 4200 no a hlmp-cw46-st0xx 50 1900 3200 no a hlmp-cw46-stbxx 50 1900 3200 no a hlmp-cw47-ps0xx 50 880 2500 yes b hlmp-cw47-qr0xx 50 1150 1900 yes b hlmp-cw47-qrbxx 50 1150 1900 yes b hlmp-cw47-ru0xx 50 1500 4200 yes b hlmp-cw47-st0xx 50 1900 3200 yes b hlmp-cw47-stbxx 50 1900 3200 yes b hlmp-cw76-nr0xx 70 680 1900 no a hlmp-cw76-pq0xx 70 880 1500 no a hlmp-cw76-pqbxx 70 880 1500 no a hlmp-cw76-qt0xx 70 1150 3200 no a hlmp-cw76-rs0xx 70 1500 2500 no a hlmp-cw76-rsbxx 70 1500 2500 no a hlmp-cw77-nr0xx 70 680 1900 yes b hlmp-cw77-pq0xx 70 880 1500 yes b hlmp-cw77-pqbxx 70 880 1500 yes b hlmp-cw77-qt0xx 70 1150 3200 yes b hlmp-cw77-rs0xx 70 1500 2500 yes b hlmp-cw77-rsbxx 70 1500 2500 yes b
4 0 5 10 15 20 25 30 35 0 20 40 60 80 100 ambient temperature - ?c i f - forward current - ma r j-a = 585?c/w r j-a = 780?c/w figure 3. relative intensity versus dc forward current figure 1. relative intensity vs. wavelength figure 2. forward current vs. ambient temperature electrical/optical characteristics t a = 25 o c notes: 1. the reverse voltage of the product is equivalent to the forward voltage of the protective chip at i r = 10 a 2. the chromaticity coordinates are derived from the cie 1931 chromaticity diagram and represent the perceived color of the devi ce. parameters symbol min typ max units test condition forward voltage v f 3.2 4.0 v i f = 20 ma reverse voltage [1] v r 5.0 v i r = 10 a thermal resistance r j-pin 240 o c/w led junction to anode lead chromaticity coordinates [2] x y 0.31 0.31 i f = 20 ma capacitance c 70 v f =0, f=1mhz 0.0 0.2 0.4 0.6 0.8 1.0 380 480 580 680 780 wavelength - nm relative luminous intensity 0 0.3 0.6 0.9 1.2 1.5 0102030 forward current - ma relative luminous intensity notes: 1. derate linearly as shown in figure 2. 2. duty factor 10%, frequency 1khz 3. 1.59 mm (0.060 inch) below body absolute maximum rating at t a = 25 o c parameters value unit dc forward current [1] 30 ma peak pulsed forward current [2] 100 ma power dissipation 105 mw led junction temperature 110 o c operating temperature range -40 to +85 o c storage temperature range -40 to +100 o c wave soldering temperature [3] 250 for 3 seconds o c solder dipping temperature [3] 260 for 5 seconds o c
5 intensity bin limit table figure 7. spatial radiation pattern for cw7x bin intensity (mcd) at 20 ma min max n680 880 p 880 1150 q 1150 1500 r 1500 1900 s 1900 2500 t 2500 3200 u 3200 4200 figure 4. chromaticity shift vs. current *note: (x,y) values @ 20ma reference to (0,0) figure 5. forward current vs. forward voltage figure 6. spatial radiation pattern for cw4x 0 5 10 15 20 25 30 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 v f - forward voltage - volts i f - forward current - ma -0.010 -0.005 0.000 0.005 0.010 0.015 0.020 0.025 -0.005 0.000 0.005 0.010 0.015 x-coordinates y-coordinates 30ma 20ma 10ma 5ma 1ma 0 0.5 1 -90 -60 -30 0 30 60 90 angular displacement (?) relative luminous intensity 0 0.5 1 -90 -60 -30 0 30 60 90 angular displacement (?) relative luminous intensity tolerance for each bin limit is 15%
www.agilent.com/ semiconductors for product information and a complete list of distributors, please go to our web site. for technical assistance call: americas/canada: +1 (800) 235-0312 or (408) 654-8675 europe: +49 (0) 6441 92460 china: 10800 650 0017 hong kong: (+65) 6756 2394 india, australia, new zealand: (+65) 6755 1939 japan: (+81 3) 3335-8152(domestic/inter- national), or 0120-61-1280(domestic only) korea: (+65) 6755 1989 singapore, malaysia, vietnam, thailand, philippines, indonesia: (+65) 6755 2044 taiwan: (+65) 6755 1843 data subject to change. copyright ?2004-2005 agilent technologies, inc. obsoletes 5989-3103en august 18, 2005 5989-3735en color bin limit table note: 1. bin categories are established for classification of products. products may not be available in all bin categories. please contact your agilent representative for information on currently available bins. color bin limits with respect to cie 1931 chromaticity diagram rank limits (chromaticity coordinates) 1 x 0.330 0.330 0.356 0.361 y 0.360 0.318 0.351 0.385 2 x 0.287 0.296 0.330 0.330 y 0.295 0.276 0.318 0.339 3 x 0.264 0.280 0.296 0.283 y 0.267 0.248 0.276 0.305 4 x 0.283 0.287 0.330 0.330 y 0.305 0.295 0.339 0.360 0.40 0.35 0.30 0.25 0.20 0.26 0.30 0.34 0.38 y-coordinate x-coordinate 3 2 4 1 black body curve tolerance for each bin limit is 0.01
|
